, ,

• 一、Tulsimer^® MB-106 UP

  核子级抛光树脂Tulsimer^® MB-106 UP ，产水18.2兆欧超纯水制备，性能对应罗门6040抛光树脂。主要优势是产水量大，行业内口碑较佳，具有超高性价比。案例详情请来电索取。

  

     （一）简要介绍  

  Tulsimer^®MB-106 UP 是由核子级强酸型阳离子Tulsimer^®T-46 及核子级强碱型阴离子Tulsimer^®A-33 以1:2 体积比的剂量比例，预先混合的混床级离子交换树脂，专门提供给需要高纯水系统抛光用。

  Tulsimer^®MB-106 UP 是专门用于超纯水的段的抛光处理。

  Tulsimer^®MB-106 UP 适合用于电子产业，生产半导体及映像管产业等需要超纯水的行业。具有高的交换容量及优越的物理特性。

  （二）基本特性  

  表1-1 Tulsimer^® MB-106 UP 基本特性

  型式 (Type)	T-46 (阳) 强酸性阳离子交换树脂 (Strong acid Cation exchange resin)	A-33 (阴) 强碱性阴离子交换树脂 (Strong base Anion exchange resin)
  主体结构 (Matrix Structure)	(Cross linked polystyrene)	(Cross linked polystyrene)
  功能基 (Functional Group)	基 (Sulfonic acid)	季胺 (Quaternary ammonium Type I)
  物理性貭 (Physical Form)	球状颗粒(Moist spherical beads)	球状颗粒 (Moist spherical beads)
  离子型式 (Ionic form supplied)	氢 (Hydrogen)	氢氧 (Hydroxide)
  粒径范围 (U.S.mesh in wet)	16 to 50	16 to 50
  粒度范围 (Particle Size)	0.3 to 1.2 mm	0.3 to 1.2 mm
  微粒含量 (Fines Content)	穿过 US 50 Mesh 小于 0.5% (Less Than 0.5% passing through 50 U.S.mesh)	穿过 US 50 Mesh 小于 0.5% (Less than 0.5% passing through 50 U.S.mesh)
  总交换容量 (Total Exch. Capacity)	1.8 meq/ml minimum of 99% in hydrogen form	1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form
  PH 范围 (pH Range)	0 to 14	0 to 14
  允许温度 (Temp. Stability)	120°C	60°C
  溶解率 (Solubility)	Insoluble in all common solvents	Insoluble in all common solvents
  溶出有机物 (Organic leachable)	Less than 0.2 mg KMNO per ml of wet resin	Less than 0.2 mg KMNO per ml of wet resin
  密度 (Backwash settled density)	Approx.750 gm/liter
  不纯物 (Impurities)	Fe=50 ppm(max) Cu=50 ppm(max) Pb=50 ppm(max)	Fe=50 ppm(max) Cu=50 ppm(max) Pb=50 ppm(max)
  球粒强度 (Bead strength)	Avg. not less than 500g/bead by Chatillon test (ASTM Standard)	Avg.  not less than 300g/bead by Chatillon test (ASTM Standard)

  
  
  

  
  

• , ,