进口电动高温高压小型球阀产品概述：

德国《LOCKE》洛克--进口电动高温高压小型球阀是由锻钢高压阀体及电子式角行程电动执行器组成。电动执行器采用一体式结构，输入220V电源即可直接进行开关量调节，亦可内置伺服模块，输入控制信号(4～20mADC或1～5VDC)及单相电源即可控制运转。电动高温高压小型球阀具有结构紧凑、体积精小、运行可靠、密封性好、维修容易、安装方便、适应性强等优点。特别适合于介质是粘稠、含颗粒、纤维性质的场合。广泛应用于石油、化工、教学设备、轻工、高压设备、制药、造纸等工业自动控制系统中，作远距离集中控制或就地控制。

进口电动高温高压小型球阀产品特点：

1.结构紧凑,耐压性能好

2.双密封面,性能更可靠

3.启闭扭矩轻,开关迅速

4.阀腔全通径结构,流体阻力小

5.适用范围广,通径适合大小管道

6.维修方便,密封圈是活动的,拆卸更换都方便

适用介质:水、蒸汽、气体、液压油等介质。

进口电动高温高压小型球阀性能范围：

规格范围:DN6-DN80

温度范围:-40℃≈500℃

压力范围:160-500BAR  10000PSI  16-80Mpa    150LB-2500LB

阀体材质:碳钢、304、316SS

连接方式:对焊、卡套、卡箍、内螺纹、外螺纹连接

球封材料:铬/铬镍/铬镍钼系不锈钢

密封材料:柔性石墨垫圈/316＋柔性石墨垫圈、(M/F)高强度耐磨碳结石墨≤300℃ (PPL)对莅聚苯、温度≤350℃

手柄形式:锌合金曲手柄 、铸钢曲手柄

适用范围:气体、燃气、水、油品、蒸汽及某些腐蚀性液体

制造标准:国标GB、JB、HG，API、ANSI，英标BS，日本JIS、JPI等

Introduction of imported electric high temperature and high pressure small ball valve products:

The imported electric high temperature and high pressure small ball valve is composed of forged steel high pressure valve body and electronic angular stroke electric actuator. The electric actuator adopts an integrated structure. It can directly adjust the switching value by inputting the 220 V power supply. It can also have a built-in servo module. It can control the operation by inputting the control signal (4 ~ 20 ADC or 1 ~ 5 VDC) and single-phase power supply. Electric high temperature and high pressure small ball valve has the advantages of compact structure, small volume, reliable operation, good sealing, easy maintenance, easy installation and strong adaptability. It is especially suitable for the occasions where the medium is viscous, granular and fibrous. Widely used in petroleum, chemical industry, teaching equipment, light industry, high voltage equipment, pharmaceutical, paper and other industrial automatic control systems for remote centralized control or local control.

Features of imported electric high temperature and high pressure small ball valve:

1. Compact structure, good pressure resistance

2. Double sealing surface, more reliable performance

3. Light torque and quick switch

4. Full diameter structure of valve cavity, low fluid resistance

5. Wide range of application, diameter suitable for large and small pipes

6. Easy maintenance, movable sealing ring, easy disassembly and replacement

Applicable media: water, steam, gas, hydraulic oil and other media.

Performance range of imported electric high temperature and high pressure small ball valve:

Specification range: dn6-dn80

Temperature range: - 40 ℃ ~ 500 ℃

Pressure range: 160-500bar 10000psi 16-80mpa 150lb-2500lb

Valve body material: carbon steel, 304, 316SS

Connection mode: butt welding, ferrule, clamp, internal thread and external thread connection

Ball sealing material: Cr / Cr Ni / Cr Ni Mo stainless steel

Sealing material: flexible graphite gasket / 316 + flexible graphite gasket, (M / F) high strength wear-resistant carbon stone ink ≤ 300 ℃ (PPL), polystyrene, temperature ≤ 350 ℃

Handle type: zinc alloy curved handle, cast steel curved handle

Scope of application: gas, gas, water, oil, steam and some corrosive liquids

Manufacturing standards: GB, JB, Hg, API, ANSI, BS, JIS, JPI, etc